THE COMPONENTS OF THIS KIT ARE AS FOLLOWS: 4 THREE INCH WOOL PADS (CUTTING), 1 1/4 LB. JAR OF NUVITE GRADE G6 POLISH (CUTTING), 4 THREE INCH YELLOW FOAM PADS (POLISHING & FINISHING), 1 1/4 LB. JAR NUVITE GRADE S POLISH (FINISHING), 1 EXTENDER KIT (8" EXTENDER AND 3" MUSHROOM BUFF), 2 SMALL CYLINDER BUFFS FOR SLOTS, 2 TWO INCH MUSHROOM BUFFS FOR AROUND LUG NUT AREA, 1 TAPER BUFF (TO BE USED OPTIONALLY WITH CLYLINDER BUFF), 1 BACKING PLATE, A 1/4" SPINDLE FOR BACKING PLATE (CAN BE USED ON 1/4", 3/8", AND 1/2" DRILL), AND 4 MICROFIBER TOWELS FOR FINAL WIPE DOWN. (THIS KIT IS NOT INTENDED FOR USE ON CLEARCOATED WHEELS.)