THIS KIT IS INTENDED FOR ALUMINUM WHEELS THAT ARE NOT HEAVILY OXIDIZED OR PITTED. THE KIT IS FOR MAINTENANCE, OR FOR WHEELS IN  REASONABLY GOOD SHAPE. THERE MAY BE VERY LIGHT OXIDATION,  BUT NOT MODERATE TO HEAVY CORROSION.

THE BASIC KIT CONTAINS THE FOLLOWING: FOUR 3 1/2" WOOL/SYNTHETIC POLISHING PADS FOR POLISHING, A 1/4 LB. JAR OF NUVITE "GRADE S" METAL POLISH" (FINISHING), A BACKING PLATE WITH 1/4" SPINDLE (USE WITH A 1/4", 3/8" OR 1/2" DRILL), ONE 3" INCH MUSHROOM BUFF FOR AROUND LUG NUT AREA, ONE SMALL CYLINDER BUFF FOR SLOTS, AND TWO 16" X 16" MICROFIBER TOWELS. 

(DO NOT USE ON CLEARCOATED WHEELS. CONCERNING THE ACTUAL USE OF THIS KIT, PLEASE SEE THE "HOW TO USE" PAGE WHERE YELLOW FOAM PADS ARE BEING USED, BUT REGARDS THE SAME PROCESS). (A FAVORITE IN THE AIRCRAFT INDUSTRY, NUVITE POLISHES WORK VERY WELL WITH THESE KITS.)