 | NEW ZEPHYR HIGH DENSITY COMPOSITE NYLON SAFETY FLANGE
THIS IS A NEW LIGHTWEIGHT SAFETY FLANGE THAT IS STRONGER THAN ALUMINUM. FOR USE WITH 8" AND 10" AIRWAYS WITH 3" CENTER PLATES AND 5/8" ARBOR HOLE. | $14.95 |
 |
 | 2" EXTENDER KIT
THE EXTENDER KIT IS INTENDED TO BE USED IN CONJUNCTION WITH THE COMPOSITE SAFETY FLANGE. IT IS DESIGNED TO MOVE THE BUFFING WHEELS 2" OUT FROM BUFFER/GRINDER; OR IT CAN BE USED WHEN ADDING AN EXTRA BUFFING WHEEL (STACKING), HOWEVER, A LONGER BOLT MAY BE NECESSARY. (5/8" X 11 THREAD SIZE.) | $19.95 |
|
 | 6" EXTENDER
USE WITH VARIABLE SPEED MACHINES ONLY. | $15.95 |
|
 | BUFFER ADAPTER (5/8" X 11 SHAFT, FITS BUFF WITH 5/8" HOLE.)
FITS BUFFING WHEEL WITH 5/8" HOLE. INTENDED TO MOVE COTTON BUFFING WHEEL 2" OUT FROM GRINDER/BUFFER; OR USE TO ADD ADDITIONAL BUFF (STACKING). A LONGER BOLT MAY BE NECESSARY. THIS ADAPTER IS NOT INTENDED FOR AIRWAY BUFFING WHEELS WITH STEEL CENTR PLATE. | $16.95 |
|
 | BUFFER ADAPTER (5/8" X 11 SHAFT, FITS BUFF WITH 1/2" HOLE.)
FITS BUFFING WHEEL WITH 1/2" HOLE. INTENDED TO MOVE COTTON BUFFING WHEEL 2" OUT FROM BUFFER/GRINDER; OR USE TO ADD ADDITIONAL WHEEL (STACKING). A LONGER BOLT MAY BE NECESSARY. THIS ADAPTER IS NOT INTENDED FOR AIRWAY BUFFING WHEELS WITH STEEL CENTER PLATE. | $14.95 |
|
 | DRILL ADAPTER FOR 1/4" AND 1/2" CHUCK
FITS BUFFING WHEELS WITH 1/2" AND 5/8" HOLE. USE WITH BUFFING WHEELS HAVING 6" OR LESS DIAMETER TO BE ABLE TO USE THEM WITH A DRILL. | $5.95 |
|
 | CENTERING FLANGE KIT FOR 6" WHEELS
THIS KIT IS FOR USE IN PLACE OF CENTER PLATES WHEN USING 6" CENTERLESS AIRWAY BUFFING WHEELS. THE FLANGE KIT HAS A 5/8" ARBOR HOLE. | $21.95 |
|
 | BUSHING REDUCES 5/8" CENTER HOLE TO 1/2" (3 PACK)
USE WITH VARIABLE SPEED MACHINES ONLY. | $4.49 |
|
 | ZEPHYR 8" EXTENDER
WHEN ATTACHED TO A ROUND END SHANK MOUNTED GOBLET BUFF, THE 8" EXTENDER WILL HELP YOU TO GET IN TIGHT PLACES FOR POLISHING. SIMPLY UNSCREW THE SHORT SHANK FROM ANY ONE OF THE THREE GOBLETS BELOW (2",3",4") AND REPLACE IT WITH THE 8" EXTENDER. FOLLOW BY MOUNTING THE EXTENDER TO A CORDLESS DRILL WITH EITHER A 1/4" OR 3/8" CHUCK. THE 8" EXTENDER HAS AN INNER SHAFT THAT SPINS INSIDE OF THE OUTER BLACK SLEEVE. THIS ALLOWS YOU TO HOLD THE EXTENDER TO AIM AND CONTROL YOUR BUFFING. (FOR MORE DETAILS, SEE Z BALL AND EXTENDER ABOVE THIS ITEM.) | $17.95 |
|
 | Z BALL POLISHING BALL (3" MUSHROOM BUFF W/8" EXTENDER)
THIS IS THE PERFECT CHOICE FOR THOSE HARD TO REACH PLACES, AND MAINTAINING A HIGH SHINE. SIMPLY UNSCREW THE SHORT SHANK FROM THE 3" ROUND END GOBLET BALL AND REPLACE IT WITH THE 8" EXTENDER. THIS WILL GET YOU IN "TIGHT" PLACES. THE EXTENDER MOUNTS TO A CORDLESS DRILL/DRIVER. IT WILL FIT 1/4" AND 3/8" CHUCKS. THE EXTENDER HAS AN INNER SHAFT THAT SPINS INSIDE THE BLACK OUTER SLEEVE. YOU CAN HOLD THE OUTER SLEEVE WHILE THE SHAFT AND GOBLET BALL ARE SPINNING. THIS ALLOWS YOU TO AIM AND CONTROL YOUR BUFFING. TO USE THIS KIT, POUR A SMALL AMOUNT OF METAL POLISH INTO A SMALL CONTAINER. DIP THE GOBLET BUFF INTO THE SOLUTION AS NEEDED. FOR THE FINAL WIPE-DOWN, APPLY METAL POLISH WITH A MICROFIBER TOWEL. RUB UNTIL SURFACE BECOMES DARK, LET DRY, AND WIPE OFF TO A BRILLIANT SHINE WITH A MICROFIBER TOWEL. | $21.95 |
|
 | 8" RED AIRWAY BUFFING WHEEL, HARD-DIPPED PAD
VERY HEAVY CUTTING MILL TREATED CLOTH, WATER-BASED CHEMICALLY DIPPED. USE ON IRON, STEEL, ALUMINUM AND STAINLESS STEEL. 5/8" ARBOR HOLE, 8" DIAMETER, 3400 RPM MAXIMUM RECOMMENDED. POLISHING BROCHURE INCLUDED WITH ALL BUFFING WHEELS. | $13.95 |
|
| 8" RED AIRWAY BUFFING WHEEL, HARD-DIPPED PAD (3 - PACK)
3 - PACK SAVES ON BUFFS + SHIPPING!! | $38.95 |
|
 | 8" BLUE BARON AIRWAY BUFFING WHEEL
VERY HEAVY CUTTINGMILL TREATED CLOTH FOR ALUMINUM AND STAINLESS, VERY AGGRESSIVE. 5/8" ARBOR HOLE, 8" DIAMETER, 3400 RPM MAXIMUM RECOMMENDED. POLISHING BROCHURE INCLUDED. | $12.95 |
|
| 8" BLUE BARON AIRWAY BUFFING WHEEL (3 - PACK)
3 - PACK SAVES ON BUFFS + SHIPPING!! | $35.95 |
|
| 10" BLUE BARON AIRWAY BUFFING WHEEL
| $15.95 |
|
| 10" BLUE BARON AIRWAY BUFFING WHEEL (3 - PACK)
3 - PACK SAVES ON BUFFS + SHIPPING!!
| $44.95 |
|
 | 8" ORANGE AIRWAY BUFFING WHEEL, MILL TREAT DIPPED
HEAVY-CUTTING BUFF FOR ALUMINUM AND STAINLESS. CHEMICALLY DIPPED. TRY ON DIAMOND PLATE. POLISHING BROCHURE INCLUDED. 5/8" ARBOR HOLE. 8" DIAMETER. 3400 RPM MAXIMUM RECOMMENDED. POLISHING BROCHURE IS INCLUDED WITH ALL BUFFING WHEELS. | $12.95 |
|
| 8" ORANGE AIRWAY BUFFING WHEEL, MILL TREAT DIPPED (3 - PACK)
3 - PACK SAVES ON BUFFS + SHIPPING!! | $35.95 |
|
