|
|
THE FOLLOWING KITS MAY BE JUST THE THING FOR YOUR WHEEL POLISHING NEEDS. SKILLFUL PROFESSIONALS WORK WITH EDGE BUFFS AND ROUGE BARS, BUT FOR MANY PEOPLE THIS PRESENTS QUITE A CHALLENGE. THE KITS BELOW USE A SYSTEM OF 3 1/2" PADS POWERED BY A STANDARD 3/8" DRILL. THE PADS ARE ATTACHED TO A BACKING PLATE WITH A 1/4" SPINDLE AND INSERTED INTO THE CHUCK OF A 3/8" DRILL. AUTOMOTIVE AND LIGHT TRUCK KITS  | KIT #1 Basic Kit (Light Truck or Car Kit; Maintenance or Minimal Corrosion Present)
THIS KIT IS INTENDED FOR ALUMINUM WHEELS THAT ARE NOT HEAVILY OXIDIZED OR PITTED. THE KIT IS FOR MAINTENANCE, OR FOR WHEELS IN REASONABLY GOOD SHAPE. THERE MAY BE VERY LIGHT OXIDATION, BUT NOT MODERATE TO HEAVY CORROSION.
THE BASIC KIT CONTAINS THE FOLLOWING: FOUR 3 1/2" WOOL/SYNTHETIC POLISHING PADS FOR POLISHING, A 1/4 LB. JAR OF NUVITE "GRADE S" METAL POLISH" (FINISHING), A BACKING PLATE WITH 1/4" SPINDLE (USE WITH A 1/4", 3/8" OR 1/2" DRILL), ONE 3" INCH MUSHROOM BUFF FOR AROUND LUG NUT AREA, ONE SMALL CYLINDER BUFF FOR SLOTS, AND TWO 16" X 16" MICROFIBER TOWELS.
(DO NOT USE ON CLEARCOATED WHEELS. CONCERNING THE ACTUAL USE OF THIS KIT, PLEASE SEE THE "HOW TO USE" PAGE WHERE YELLOW FOAM PADS ARE BEING USED, BUT REGARDS THE SAME PROCESS). (A FAVORITE IN THE AIRCRAFT INDUSTRY, NUVITE POLISHES WORK VERY WELL WITH THESE KITS.) | $49.95 |
 |  | KIT #2 Thorough Kit (Light Truck or Car; Light to Moderate Oxidation Present)
THE THOROUGH KIT ADDRESSES THE PROBLEM OF LIGHT TO MODERATE OXIDATION ON ALUMINUM WHEELS. IT IS NOT INTENDED FOR HEAVY OXIDATION, OR ROUGH AND PITTED WHEELS DUE TO YEARS OF NEGLECT. THIS KIT IS FOR LIGHT TO MODERATE OXIDATION.
THE COMPONENTS OF THIS KIT ARE AS FOLLOWS: FOUR 3 1/2" WOOL PADS (CUTTING), THREE-PACK OF 3 1/2" YELLOW FOAM PADS (NOT PICTURED) AS AN ADDED CUTTING OPTION, A 1/4 LB. JAR OF NUVITE "G6 GRADE METAL POLISH" (CUTTING), FOUR 3 1/2" WOOL & SYNTHETIC PADS (POLISHING & FINISHING), A 1/4 LB. JAR OF NUVITE "S GRADE METAL POLISH" (FINISHING), BACKING PLATE WITH A 1/4" SPINDLE (USE WITH A 1/4", 3/8" OR 1/2" DRILL), FOUR 16" X 16" MICROFIBER TOWELS FOR FINAL WIPE DOWN, ONE SMALL CYLINDER BUFF FOR SLOTS, TWO 3" MUSHROOM BUFFS FOR AROUND LUG NUT AREA, AND WE HAVE ALSO JUST RECENTLY ADDED FOUR 0000 STEEL WOOL PADS (NOT PICTURED) TO ASSIST WITH HAND POLISHED AREAS. (PLEASE SEE THE "HOW TO USE" PAGE FOR USE OF THIS KIT. THIS KIT IS NOT INTENDED FOR USE ON CLEARCOATED WHEELS.) | $119.95 |
|  | KIT #3 Thorough Kit w/extender Kit (Light Truck or Cars with Light to Moderate Oxidation Present
THIS KIT IS THE SAME AS THE THOROUGH KIT, (KIT #2), EXCEPT THAT IT ADDS THE EXTENDER KIT. THE EXTENDER KIT CONSISTS OF A 8" EXTENDER THAT CAN BE HAND-GUIDED, ALONG WITH AN EXTRA 3" MUSHROOM BUFF WITH A REMOVEABLE SHAFT THAT CAN BE USED WITH THE EXTENDER. THIS IS A GREAT KIT FOR DEEP DISH WHEELS AND OTHER DIFFICULT REACHES. THE EXTENDER KIT/3" MUSHROOM BUFF IS USED FOR POLISHING/MAINTENANCE, NOT CUTTING. | $129.95 |
|
BIG RIG KITS  | KIT #1 Basic Big Rig Kit ( Maintenance)
THIS KIT IS INTENDED FOR ALUMINUM WHEELS THAT ARE NOT HEAVILY OXIDIZED OR PITTED. THE KIT IS FOR MAINTENANCE, OR FOR WHEELS IN REASONABLY GOOD SHAPE. THERE MAY BE VERY LIGHT OXIDATION, BUT NOT MODERATE TO HEAVY CORROSION.
THIS BIG RIG KIT CONSISTS OF THE FOLLOWING COMPONENTS: FOUR 3 1/2" WOOL/SYNTHETIC POLISHING PADS, ONE 1/4 LB. JARS NUVITE GRADE S FINISHING POLISH, 1 EXTENDER KIT (8" EXTENDER & 3" MUSHROOM BUFF), TWO 3" INCH MUSHROOM BUFFS FOR AROUND LUG NUT AREA, TWO SMALL CYLINDER BUFFS FOR SLOTS, ONE SMALL TAPER BUFF TO BE USED OPTIONALLY, ONE BACKING PLATE WITH A 1/4" SPINDLE (USE WITH 1/4", 3/8", OR 1/2" DRILL), AND FOUR 16" X 16" MICROFIBER TOWELS FOR FINAL WIPE DOWN. (THIS KIT IS NOT INTENDED FOR CLEARCOATED WHEELS.) | $119.95 |
|  | KIT #2 Thorough Big Rig Kit (Maintenance; Light to Moderate Oxidation Present)
THE THOROUGH KIT ADDRESSES THE PROBLEM OF LIGHT TO MODERATE OXIDATION ON ALUMINUM WHEELS. IT IS NOT INTENDED FOR HEAVY OXIDATION, OR ROUGH AND PITTED WHEELS DUE TO YEARS OF NEGLECT. THIS KIT IS FOR LIGHT TO MODERATE OXIDATION.
THE COMPONENTS OF THIS KIT ARE AS FOLLOWS: FOUR 3 1/2" WOOL PADS (CUTTING), FOUR 3 1/2" YELLOW FOAM PADS (NOT PICTURED) AS AN ADDED CUTTING OPTION, ONE 1/4 LB. JAR OF NUVITE GRADE G6 POLISH (CUTTING), FOUR 3 1/2" WOOL & SYNTETIC YARN PADS (POLISHING & FINISHING), ONE 1/4 LB. JAR NUVITE GRADE S POLISH (FINISHING), ONE EXTENDER KIT (8" EXTENDER AND 3" MUSHROOM BUFF) , TWO SMALL CYLINDER BUFFS FOR SLOTS, TWO 3" MUSHROOM BUFFS FOR AROUND LUG NUT AREA, ONE TAPER BUFF (TO BE USED OPTIONALLY WITH CLYLINDER BUFF), ONE BACKING PLATE, A 1/4" SPINDLE FOR BACKING PLATE (CAN BE USED ON 1/4", 3/8", AND 1/2" DRILL), FOUR 16" X 16" MICROFIBER TOWELS FOR FINAL WIPE DOWN, AND WE HAVE ALSO JUST RECENTLY ADDED FOUR 0000 STEEL WOOL PADS (NOT PICTURED) TO ASSIST WITH HAND POLISHED AREAS. (THIS KIT IS NOT INTENDED FOR CLEARCOATED WHEELS.)
| $149.95 |
|  | Kit #3 Thorough Big Rig Kit Alternative (Maintenance: Light to Moderate Oxidation)
THIS IS THE SAME KIT AS BIG RIG KIT #2, EXCEPT THAT WE HAVE SUBSTITUTED THE NUVITE G6 POLISH WITH ZEPHYR PRO 40 METAL POLISH FOR USE WITH THE WOOL COMPOUNDING PAD; AND WE HAVE SUBSTITUTED THE NUVITE S GRADE POLISH WITH BRITEMAX FINAL SHINE & SEALANT TO BE USED WITH THE WOOL & SYNTHETIC YARN POLISHING PAD. | $139.95 |
|
FOR ADDITIONAL INDIVIDUAL POLISHING COMPONENTS FOR THE KITS ABOVE, AND ADDITIONAL SELECTIONS, PLEASE CLICK ON "INDIVIDUAL COMPONENTS" UNDER "WHEEL POLISHING KITS." TWO BASIC POLISHING KITS  | Speedy Polishing Kit
THE SPEEDY POLISHING KIT IS BACK! WE WERE WAITING ON THE 8" EXTENDERS TO ARRIVE BACK IN STOCK. THIS KIT INCLUDES THE FOLLOWING ITEMS: ONE 32 OZ. BTL. OF SPEEDY ALL METAL POLISH, FOUR 0000 STEEL WOOL PADS, ONE MICROFIBER APPLICATOR PAD, ONE 3" MUSHROOM BUFF, ONE MEDIUM TAPER BUFF, ONE SMALL CYLINDER BUFF, AND ONE 8" EXTENDER. | $39.95 |
|  | California Custom Purple Metal Polish with an 8" Extender and Lake Country Wool Ball
ONE OF MY PROFESSIONAL POLISHING CUSTOMERS CLAIMS THIS SIMPLE COMBINATION IS HIS FAVORITE WHEEL MAINTENANCE KIT. IT CONSISTS OF A 12 OZ. BOTTLE OF PURPLE METAL POLISH, A LAKE COUNTRY 3" WOOL BALL, AND AN 8" EXTENDER. | $29.95 |
|
THE KITS LISTED BELOW ARE ALL ZEPHYR SELECTIONS. THEY BEGIN WITH A COMPREHENSIVE KIT HAVING A WIDE VARIETY OF APPLICATIONS, AND THEN BECOME MORE SPECIFIC AND LIMITED.  | Zephyr's Professional Polisher's Starter Kit
SAVE $30.00 ON THIS KIT! HERE IS ALL YOU NEED TO ACHIEVE THAT PERFECT SHINE EVERY TIME. ZEPHYR'S PROFESSIONAL POLISHER'S STARTER KIT INCLUDES A VARIETY OF ROUGE BARS, BUFFING WHEELS, FLANGES, GOBLETS, MICROFIBER TOWELS, AND A SUPPLY OF PRO 40 PERFECTION METAL POLISH. THIS KIT HAS A WIDE VARIETY OF APPLICATIONS. (SEE ZEPHYR WEBSITE FOR THE LIST OF COMPONENTS www.zephyrpro40.com), BUT PLEASE COME BACK! | $269.95 |
|  | Zephyr 8 Piece Buffing Kit (Special Price: Discontinued Kit)
THIS BUFFING KIT INCLUDES A 6" CENTERLESS AIRWAY CUTTING BUFF, 6" CENTERLESS COLORING/FINISH BUFF, 3" CENTERING FLANGE KIT, 2" EXTENDER KIT, 1 LB. BAR EACH OF PRIMARY CUTTING ROUGE, SECONDARY CUTTING ROUGE, AND COLORING/FINISHING ROUGE, AS WELL AS AN 8 OZ. BOTTLE OF PRO 40 METAL POLISH. | $44.95 |
|  | Zephyr's New 8 Piece Buffing Kit
THIS KIT INCLUDES THE FOLLOWING: ONE 8 OZ. BOTTLE OF PRO 40 METAL POLISH, ONE 6" COTTON CUTTING BUFF, ONE 6" COTTON FINISHING BUFF, ONE 1 LB. BAR BROWN ROUGE, ONE 1 LB. BAR GREEN ROUGE, ONE 1 LB. BAR WHITE ROUGE, ONE 16" X 16" MICROFIBER TOWEL, AND ONE DRILL ADAPTER FOR 1/4" & 3/8" CHUCK. | $34.95 |
|  | Zephyr 6 Piece Wheel & Tank Detailing Kit
THIS KIT WAS DESIGNED FOR THOSE SMALL TO MEDIUM AREAS WHERE A LARGER BUFF JUST CAN'T REACH. JUST SNAP IN YOUR DRILL AND YOU ARE READY TO GO. THE KIT INCLUDES A 4" SHANK MOUNTED BUFFING WHEEL (SHANK CAN EASILY BE REMOVED FOR USE IN A SANDER/GRINDER), 3" SCUFFING PAD FOR RUST AND PAINT REMOVAL, 2" TAPERED POLISHING BUFF, 1" X 2" FELT CYLINDER, 1 MICROFIBER TOWEL 16" X 16", AND AN 8 OZ. BTL. OF PRO 40 METAL POLISH. | $29.95 |
|  | Zephyr 5 Piece Buffing Kit
THE CONTENTS OF THIS KIT ARE AS FOLLOWS: ONE 8 OZ. BOTTLE OF PRO 40 METAL POLISH, ONE 3" ROUND END GOBLET BUFF, ONE 4" SHANK MOUNTED BUFF, ONE 16" X 16" MICROFIBER TOWEL, AND ONE 1" X 2" FELT TAPER FOR A 1/4"- 3/8' CHUCK. | $24.95 |
|
FOR MORE METAL POLISH PRODUCTS, CLICK ON "NEXT 4" BELOW Displaying 1 - 20 / 24 results. Next 4 >>Select page: 1|2|
|
